Prediction of flexural and split tensile strength of waste glass-concrete composite using machine learning algorithms
April 2026
Waste material, including glass, presents significant environmental challenges due to its non-biodegradable nature and low global recycling rates. Incorporating waste glass into concrete offers a sustainable...
Comparing TiO2 and CuO nanoparticles as additives to improve the efficiency and exhaust gases of a four-stroke engine fueled with n-butanol-diesel mixture
April 2026
This study evaluates the effects of TiO2 and CuO nanoparticles as additives to a 15% n-butanol-diesel blend (BuD) on the performance and emissions of a four-stroke diesel engine. Tests at varying torque...
Sustainable valorization of onion bulbs for the green synthesis of gold nanoparticles and catalytic degradation of methylene blue
April 2026
The catalytic degradation of toxic synthetic dyes in wastewater remains a pressing environmental concern due to their adverse effects on ecosystems and public health. In this study, we present a green...
The impact of green innovation products on an organization’s social performance via green supply chain management
April 2026
The purpose of this study is to examine the impact of green innovation products on an organization’s social performance through mediation of green supply chain management. Using stakeholder resource-based...
Financial inclusion and green technological innovation as drivers of human capital: Evidence from E7 countries
April 2026
The acceleration of green technological innovation is an important strategy to sustain economic and human development. Prior studies focus on the financial inclusion-human capital linkage but overlook...
Interorganisational cooperation as a way of accessing green technologies for the integration of sustainable practices in SMEs
April 2026
In implementing sustainable practices, small and medium-sized enterprises (SMEs) must adopt green technologies, but due to their limited resources, one possible strategy for accessing this type of technology...
Biosorption of aqueous cadmium using chemically delignified lignocellulose from industrial hemp stalks: kinetics, isotherms, and thermodynamics
April 2026
Biosorbents present a cost-effective alternative to expensive fossil-based ion-exchange resins for addressing the challenge of heavy metal contamination in wastewater treatment. Among these contaminants,...
Artificial intelligence-based ensemble models with GUI for predicting the compressive strength of waste glass concrete
April 2026
The sustainable utilization of post-consumer waste glass in concrete has emerged as a promising approach to reduce cement consumption, mitigate landfill disposal, and enhance material performance. However,...
Agricultural digital twin for smart farming: A review
April 2026
Smart farming has introduced agricultural systems that are increasingly autonomous and highly interconnected. The Agricultural Digital Twin (ADT) is an innovative breakthrough in smart farming that...
Valorization of palm kernel shell waste into briquettes: Assessing physicochemical properties and combustion characteristics
April 2026
The palm oil industry plays a key socio-economic role in tropical countries but generates waste with untapped economic potential. This work aims to advance sustainable solutions through valorization...
Synergizing climate mitigation and circular economy: A Comprehensive review for achieving carbon neutrality
April 2026
This comprehensive review examines the synergistic integration of climate mitigation strategies and circular economy (CE) principles as a pathway toward achieving global carbon neutrality. While traditional...
Advanced digital solutions for construction waste management: A 4D BIM integrated scenario analysis
April 2026
Construction generates substantial material waste with environmental and economic impacts, yet current methods rarely integrate waste estimation with project schedules. This study develops and validates...
Hydraulic conductivity of CFBC fly ash-based geopolymer: Toward sustainable liner materials
April 2026
The availability of natural soils with hydraulic conductivity below 1 × 10−9m/s for liner systems is declining, while industrial waste such as circulating fluidized bed combustion (CFBC) fly ash remains...
Conical solar still with internal and external modifications: A comprehensive review
April 2026
The global water emergency requires innovative and sustainable solutions to afford clean water especially after a rapid growing populations and industrial practices besides environmental changes. Solar...
Upcycled textile and agricultural waste for thermal and acoustic insulation solutions
April 2026
This study investigates a novel combination of materials, incorporating pantyhose and rice husk, to develop sustainable insulation panel candidates, an approach that has not been previously explored...
Sustainable biodegradable polymer volcanic stone, and palm waste composites with enhanced properties for waste upcycling and energy-efficient construction
April 2026
This research designs a sustainable composite material using PLA, palm biomass, and ground volcanic stone (VSMGP) to improve mechanical and insulation efficiency for green construction. The raw materials...
Interactive co-pyrolysis of leucine amino acid and plastic wastes using TGA-IR-MS connection
April 2026
Waste materials from agricultural and food packaging usage pose significant health and environmental challenges, where the main source of waste originates from plastics and protein-based amino acids,...
High efficiency and sustainability of PVDF membrane in wastewater treatment and reuse
April 2026
To address the challenges of membrane fouling, short service life, and unstable performance associated with PVDF membranes in wastewater treatment and reuse, this study proposes a multi-dimensional...
Economic assessment of biodiesel pathways for carbon neutrality: Scenario analysis of China’s transportation sector
April 2026
The advancement of global endeavors to mitigate climate change is largely influenced by developments within China’s transportation sector. This study focuses on the crucial role of biodiesel as a biofuel...
Novel and hybrid model of pelican optimization algorithm with light gradient boosting model for smart infrastructure: A high-precision approach to occupancy and failure prediction
April 2026
Prediction of building occupancy is a very important element of structural health monitoring (SHM), smart building systems, and energy management. In this study, a number of visualization tools are...
Green computing for sustainability
April 2026
Wireless network expansion needs intelligent solutions that combine energy-conscious operations with the maintenance of performance levels. This study presents an eco-friendly wireless ad hoc network...
Recent advances in nearly zero energy commercial and residential buildings: Innovations, challenges, and climate-specific solutions
April 2026
Nearly Zero Energy Buildings (NZEBs) are pivotal in addressing the escalating energy and environmental challenges of hot climates, where extreme cooling demands and reliance on fossil fuels intensify...
Digital infrastructure, green technology innovation, and environmental sustainability: Evidence from China’s resource-based cities
April 2026
This study examines how information technology (IT) development influences the environmental sustainability (ES) of China’s resource-based cities. Using data from 1210 cities, the entropy weight method...
Unraveling the cognitive underpinnings: Exploring IT managers’ meanings of Green IT practices in SME
April 2026
Information Technology (IT) plays a central role in the environmental performance of small and medium-sized enterprises (SMEs); however, the meanings that IT managers attribute to Green IT practices...
Partial hydrogenation of trimethylolpropane triester derived from sunflower seed oil over Pt/KIT-6 catalyst for high oxidation stability bio-transformer oil application
April 2026
Currently, bio-transformer oil (BTO) is in high demand due to the increasing demand for electrical power and environmental policy considerations. Hence, this research aimed to produce BTO with high...