Various manufacturing methods and ideal properties of scaffolds for tissue engineering applications
Volume 1, Issue , January 2023, Page
Share article
Biodegradable PLA-ZnO nanocomposite biomaterials with antibacterial properties, tissue engineering viability, and enhanced biocompatibility
Volume 1, Issue , January 2023, Page
Share article
High entropy alloy coatings for biomedical applications: A review
Volume 1, Issue , January 2023, Page
Share article
Surface modification of additively manufactured metallic biomaterials with active antipathogenic properties
Volume 1, Issue , January 2023, Page
Share article
Self-assembly meets additive manufacturing: Bridging the gap between nanoscale arrangement of matter and macroscale fabrication
Volume 1, Issue , January 2023, Page
Share article
Biodegradable Zn–Cu–Li alloys with ultrahigh strength, ductility, antibacterial ability, cytocompatibility, and suitable degradation rate for potential bone-implant applications
Volume 1, Issue , January 2023, Page
Share article
Biodegradable metallic suture anchors: A review
Volume 1, Issue , January 2023, Page
Share article
Mechanical and corrosion properties of Mg–MgO and Mg–Al<inf>2</inf>O<inf>3</inf> composites fabricated by equal channel angular extrusion method
Volume 1, Issue , January 2023, Page
Share article
Biodegradation mechanisms of pure Mg in presence of glucose, vitamin C, and citric acid
Volume 1, Issue , January 2023, Page
Share article
Smart multifunctional elastomeric nanocomposite materials containing graphene nanoplatelets
Volume 1, Issue , January 2023, Page
Share article
Feasibility, challenges and future prospects of biodegradable zinc alloys as orthopedic internal fixation implants
Volume 2, Issue , January 2024, Page
Share article
Smart self-healing coatings on biomedical magnesium alloys: A review
Volume 1, Issue , January 2023, Page
Share article
A compound Schiff base coating on biomedical magnesium alloy for enhanced corrosion resistance and biocompatibility
Volume 1, Issue , January 2023, Page
Share article
Advancements in polymer (Nano)composites for phase change material-based thermal storage: A focus on thermoplastic matrices and ceramic/carbon fillers
Volume 2, Issue , January 2024, Page
Share article
Highly stretchable strain sensors based on gold thin film reinforced with carbon nanofibers
Volume 1, Issue , January 2023, Page
Share article
Novel approach to the 3D printing of biphasic calcium phosphate/molybdenum disulfide composite reinforced with polyamide12
Volume 2, Issue , January 2024, Page
Share article
Broadening the microstructure regime of Al<inf>2</inf>O<inf>3</inf>–ZrO<inf>2</inf> hypereutectic ceramic fabricated via laser powder bed fusion
Volume 2, Issue , January 2024, Page
Share article
Effect of layer height, print speed and cell geometry on mechanical properties of marble PLA based 3D printed parts
Volume 1, Issue , January 2023, Page
Share article
A green and solvent-free method for simultaneously producing graphene nanoplatelets, nanoscrolls, and nanodots and functionalizing their surface for epoxy nanocomposites
Volume 1, Issue , January 2023, Page
Share article
Phase field simulation of martensitic transformation in Ti–24Nb–4Zr–8Sn alloy
Volume 1, Issue , January 2023, Page
Share article
Fabrication of calcium carbonate coating on magnesium-neodymium alloy for mitigation of corrosion in simulated concrete pore solution
Volume 2, Issue , January 2024, Page
Share article
Multiprocess additive manufacturing via fused deposition modeling, chemical deposition, and electroplating with tough interfacial adhesion
Volume 2, Issue , January 2024, Page
Share article
Laser surface engineering of Ti–6Al–4V with TiO<inf>2</inf>/Al<inf>2</inf>O<inf>3</inf> composite powder for improved wear resistance
Volume 1, Issue , January 2023, Page
Share article
Peculiar microstructural evolution and hardness variation depending on laser powder bed fusion-manufacturing condition in Ti–6Al–2Sn–4Zr–6Mo
Volume 2, Issue , January 2024, Page
Share article
Corrosion resistance of in situ steam LDH coating on AZ31 and AM30 Alloys: Influence of NaOH and Al–Mn phase
Volume 2, Issue , January 2024, Page
Share article