Most Downloaded Articles

Open access

ISSN: 2097-0498
CN: 61-1520/U
e-ISSN: 2773-0077

Intelligent pavement condition survey: Overview of current researches and practices

Automated pavement condition survey is of critical importance to road network management. There are three primary tasks involved in pavement condition surveys, namely data collection, data processing...

Share article

Review of advanced road materials, structures, equipment, and detection technologies

As a vital and integral component of transportation infrastructure, pavement has a direct and tangible impact on socio-economic sustainability. In recent years, an influx of groundbreaking and state-of-the-art...

Share article

Advances and development trends in eco-friendly pavements

The major contemporary in road pavement engineering is related to the creation of green and sustainable infrastructures, e.g., reduction of environmental impacts, increase in traffic safety, and transportation...

Share article

Bio-based rejuvenators in asphalt pavements: A comprehensive review and analytical study

The pressing demand for sustainable advancements in road infrastructure has catalyzed extensive research into environmentally conscious alternatives for the maintenance and restoration of asphalt concrete...

Share article

A systematic review of rigid-flexible composite pavement

Rigid-flexible composite pavement has gained significant popularity in recent decades. This paper provides a comprehensive review of the research progress concerning rigid-flexible composite pavement,...

Share article

Predicting pavement condition index based on the utilization of machine learning techniques: A case study

Pavement management systems (PMS) are used by transportation government agencies to promote sustainable development and to keep road pavement conditions above the minimum performance levels at a reasonable...

Share article

Bird’s-eye view of recycled solid wastes in road engineering

Recent trends in road engineering have explored the potential of incorporating recycled solid wastes into infrastructures that including pavements, bridges, tunnels, and accessory structures. The utilization...

Share article

Highway constructions on the Qinghai-Tibet Plateau: Challenge, research and practice

Highway constructions on the Qinghai-Tibet Plateau (QTP) face great challenges induced by the unique local environmental, geological, and engineering conditions. The large area of permafrost, great...

Share article

Automation in road distress detection, diagnosis and treatment

Road transportation plays a crucial role in society and daily life, as the functioning and durability of roads can significantly impact a nation's economic development. In the whole life cycle of the...

Share article

Effect of dual and new generation wide-base tire assembly on inverted pavements

The conventional flexible pavements have been constructed such that the stiffness of the layer reduces with depth. The crust thickness becomes significantly high for heavy traffic corridors resulting...

Share article

Use of bio-based products towards more sustainable road paving binders: A state-of-the-art review

Many industrial sectors exploit fossil sources to develop useful and necessary materials for our needs, such as bituminous paving materials. Bitumen, a key component of asphalt mixtures, is derived...

Share article

A state-of-the-art review of asphalt pavement surface texture and its measurement techniques

To understand the research status of asphalt pavement texture, the related achievements and progress of pavement surface texture were systematically sorted out from three aspects: the characterization...

Share article

Research progresses of fibers in asphalt and cement materials: A review

Asphalt mixtures and cement concrete are an important material in the construction of roads, highways and buildings, and there has been a lot of research about the improvement of their performance....

Share article

Toughness improvement mechanism and evaluation of cement concrete for road pavement: A review

Traditional cement concrete has the disadvantages of low tensile strength, poor toughness, and rapid development of cracks while cracking, which causes a significantly negative influence on the safety...

Share article

Fatigue test setups and analysis methods for asphalt mixture: A state-of-the-art review

Fatigue performance evaluation on asphalt mixture provides an essential reference for asphalt mixture design and pavement structure design. Laboratory fatigue test has been widely used by researchers...

Share article

Pavement structure and materials design for sea-crossing bridges and tunnel: Case study of the Hong Kong–Zhuhai–Macau Bridge

With the continuous development of bridge and tunnel construction technologies, large-scale sea-crossing bridges and tunnels have gradually become the preferred choice for regional traffic. The construction...

Share article

Review of ultraviolet ageing mechanisms and anti-ageing methods for asphalt binders

Asphalt binder is inevitably aged by ultraviolet (UV) light during its service period. UV ageing can significantly decrease the technical properties of asphalt binder. The sensitivity of asphalt to...

Share article

A review on evaluation of crack resistance of asphalt mixture by semi-circular bending test

Although there are many kinds of fracture tests to choose from in evaluating the crack resistance of asphalt mixture, the semi-circular bending (SCB) test has attracted a lot of attention in the academic...

Share article

Low temperature cracking behavior of asphalt binders and mixtures: A review

Low temperature cracking (LTC) distress on pavement seriously affects road life. This paper finished a literature review of the research on the mechanism of LTC of asphalt composites (asphalt composites...

Share article

Texturing and evaluation of concrete pavement surface: A state-of-the-art review

Concrete pavement is accompanied by two major functional properties, namely noise emission and friction, which are closely related to pavement surface texture. While several technologies have been developed...

Share article

A review of the development of asphalt foaming technology

To comprehensively assess the current state-of-art in asphalt foaming technology, the following four key aspects have been reviewed systematically: foaming principles, test methods, evaluation indicators,...

Share article

Determination and prediction of pavement skid resistance–connecting research and practice

Adequate pavement skid resistance is a key requirement for safe road operations. Unfortunately, the measurement and prediction of the skid resistance property of an in-service road pavement, or pavement...

Share article

Recent developments in asphalt-aggregate separation technology for reclaimed asphalt pavement

Reclaimed asphalt pavement (RAP) has significant recycling value because it contains nonrenewable resources including asphalt and aggregate. However, thus far, only a small part of RAP materials can...

Share article

Long-term performance of recycled asphalt mixtures containing high RAP and RAS

The application of reclaimed asphalt pavement (RAP) and reclaimed asphalt shingles (RAS) on asphalt pavement can reduce the asphalt paving cost, conserve energy and protect the environment. However,...

Share article

Development and optimization of object detection technology in pavement engineering: A literature review

Due to the rapid advancement of the transportation industry and the continual increase in pavement infrastructure, it is difficult to keep up with the huge road maintenance task by relying only on the...

Share article

Stay Informed

Register your interest and receive email alerts tailored to your needs. Sign up below.